Fragile, complex and free-form surfaces can be captured as a dense and detailed 3D point cloud by the FARO® ScanArm® and Cobalt Array Imager, allowing users to perform non-contact, 3D inspections with ease.
3D scanning at your fingertips
FARO’s ScanArm and Cobalt Array Imager allows for rapid scanning with an extended field of view where conventional contact inspection methods are not feasible or practical. The Cobalt Array Imager can even be connected in a multi-array configuration to allow for a much wider scanning area to be covered. Data is captured in high definition and detailed 3D point clouds.
Easily measure complex shapes
Non-contact 3D scanning from FARO can digitize features such as flush and gap that are difficult to inspect with contact methods. Complex shapes and difficult-to-access parts can now be easily inspected and verified accurately. Capture seamless information required for precise measurement and accurate inspection of parts on the shop floor.
Application Video: Non-Contact Inspection
The FARO Laser Line Probe HD in combination with the FARO Edge measuring arm is the high performance, most affordable non-contact measurement system on the market.
- + Fast
-
3D scanning at your fingertips
FARO’s ScanArm and Cobalt Array Imager allows for rapid scanning with an extended field of view where conventional contact inspection methods are not feasible or practical. The Cobalt Array Imager can even be connected in a multi-array configuration to allow for a much wider scanning area to be covered. Data is captured in high definition and detailed 3D point clouds.
- + Easy
-
Easily measure complex shapes
Non-contact 3D scanning from FARO can digitize features such as flush and gap that are difficult to inspect with contact methods. Complex shapes and difficult-to-access parts can now be easily inspected and verified accurately. Capture seamless information required for precise measurement and accurate inspection of parts on the shop floor.
- + Video
-
Application Video: Non-Contact Inspection
The FARO Laser Line Probe HD in combination with the FARO Edge measuring arm is the high performance, most affordable non-contact measurement system on the market.
For all your Factory Metrology needs
FARO ScanArm®
The FARO ScanArm combines all of the advantages of the Quantum line of FaroArms – including the world’s only 8-Axis portable metrology arm solution – with the FAROBlu or Prizm Color hand held laser scanner to deliver unparalleled non-contact measurement capabilities. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.
- FAROBlu HD LLP laser technology delivers improved scanning results with higher speed and resolution
- FAROBlu SD LLP delivers cost-effective standard resolution scanning solution
- Prizm Color Lase Line Probe scans parts in color, and full, uncompromised measurement resolution
- 8-Axis ScanArm offers comprehensive solution enabling part to be rotated in real-time to simplify measurement and scanning activities
FARO Cobalt Array Imager
Unlimited Multi-Imager Scanning Configurations
The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.
- 5MP model – for most applications
- 9MP model – improves resolution and the ability to capture features on edges and surfaces
- Interchangeable lens with 250mm and 500mm field of view
- Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens
- + ScanArm
-
FARO ScanArm®
The FARO ScanArm combines all of the advantages of the Quantum line of FaroArms – including the world’s only 8-Axis portable metrology arm solution – with the FAROBlu or Prizm Color hand held laser scanner to deliver unparalleled non-contact measurement capabilities. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.
- FAROBlu HD LLP laser technology delivers improved scanning results with higher speed and resolution
- FAROBlu SD LLP delivers cost-effective standard resolution scanning solution
- Prizm Color Lase Line Probe scans parts in color, and full, uncompromised measurement resolution
- 8-Axis ScanArm offers comprehensive solution enabling part to be rotated in real-time to simplify measurement and scanning activities
- + Cobalt
-
FARO Cobalt Array Imager
Unlimited Multi-Imager Scanning Configurations
The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.
- 5MP model – for most applications
- 9MP model – improves resolution and the ability to capture features on edges and surfaces
- Interchangeable lens with 250mm and 500mm field of view
- Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens
FARO CAM2® 2018
Integrated Experience, Intuitive Workflow and Insightful Reporting
FARO CAM2 2018 is the world’s smartest 3D measurement platform and the only metrology software in the market that delivers on the strategic goals to always offer the best integrated FARO hardware experience, intuitive workflow and insightful reporting.
- FARO Inside – optimized to support the FARO portfolio of metrology hardware solutions
- Guided Workflows – simply and easily step through almost any measurement inspection routine
- RPM (Repeat Part Management) Control Center – real-time information for actionable manufacturing insight
- Remote Measurement – run commands, change scanning modes and see results in real-time
FARO CAM2® SmartInspect
The first portable measurement software
FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.
- Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
- On-Screen Dimensioning – Users can interact directly with the graphical view
- Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
- Mobile Device – Move the device during the measurement process and measure from different positions
BuildIT Software & Solutions
Your Product, Your Process, Your Solution
BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.
- Highly configurable and flexible – Streamline your workflows and processes
- Advanced automation capabilities through user friendly interface with no coding required
- Powerful GD&T Analysis capabilities for full model-based workflows
- Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices
- + CAM2 2018
-
FARO CAM2® 2018
Integrated Experience, Intuitive Workflow and Insightful Reporting
FARO CAM2 2018 is the world’s smartest 3D measurement platform and the only metrology software in the market that delivers on the strategic goals to always offer the best integrated FARO hardware experience, intuitive workflow and insightful reporting.
- FARO Inside – optimized to support the FARO portfolio of metrology hardware solutions
- Guided Workflows – simply and easily step through almost any measurement inspection routine
- RPM (Repeat Part Management) Control Center – real-time information for actionable manufacturing insight
- Remote Measurement – run commands, change scanning modes and see results in real-time
- + CAM2 SmartInspect
-
FARO CAM2® SmartInspect
The first portable measurement software
FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.
- Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
- On-Screen Dimensioning – Users can interact directly with the graphical view
- Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
- Mobile Device – Move the device during the measurement process and measure from different positions
- + BuildIT
-
BuildIT Software & Solutions
Your Product, Your Process, Your Solution
BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.
- Highly configurable and flexible – Streamline your workflows and processes
- Advanced automation capabilities through user friendly interface with no coding required
- Powerful GD&T Analysis capabilities for full model-based workflows
- Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices