With the portability of FARO’s 3D measurement solutions, you can now measure your products where they are being made — right on the production line.

Every step you take, you can measure
In the past, machine shop inspection has required the removal of parts from a CNC machine to a controlled inspection area for surface inspection or dimensional inspection of the part. This is time-consuming and expensive. Incorporating portable CMMs from FARO directly into production lines can streamline and speed up this process.

In-line, in-process and on-machine
Each production step can be measured and documented by verifying tolerances and the quality of your product.
The portability of FARO’s 3D metrology tools, such as the measuring arm, enables efficient in-line, in-process and on-machine inspections. This delivers consistent, accurate measurements directly on or at the machine producing the parts.
Application Video: In-process Inspection
The portability of FARO’s 3D measurement solutions allows flexibility to inspect anywhere in the production process and delivers consistent, accurate and on-time information where it is needed.
- + Produce and measure
-
Every step you take, you can measure
In the past, machine shop inspection has required the removal of parts from a CNC machine to a controlled inspection area for surface inspection or dimensional inspection of the part. This is time-consuming and expensive. Incorporating portable CMMs from FARO directly into production lines can streamline and speed up this process.
- + Check on the go
-
In-line, in-process and on-machine
Each production step can be measured and documented by verifying tolerances and the quality of your product.
The portability of FARO’s 3D metrology tools, such as the measuring arm, enables efficient in-line, in-process and on-machine inspections. This delivers consistent, accurate measurements directly on or at the machine producing the parts.
- + Video
-
Application Video: In-process Inspection
The portability of FARO’s 3D measurement solutions allows flexibility to inspect anywhere in the production process and delivers consistent, accurate and on-time information where it is needed.
For all your Factory Metrology needs
FaroArm®
The Global Standard for Arm Technology
The FaroArm is an innovative portable coordinate measuring machine that allows manufacturers easy verification of product quality by performing 3D inspections, dimensional analysis, CAD comparison, tool certifications, and more. The Quantum line of FaroArms including the world’s only 8-Axis portable metrology arm solution, extends FARO’s tradition of maximum unsurpassed measurement accuracy, consistency and reliability in every working environment.
- 8-Axis FaroArm enables part to be rotated in real-time for unmatched measuring speed and user friendliness
- FARO kinematic smart probes for quick probe replacement without the need to recalibrate
- Robust high-speed wireless operation

FARO ScanArm®
The FARO ScanArm combines all of the advantages of the Quantum line of FaroArms – including the world’s only 8-Axis portable metrology arm solution – with the FAROBlu or Prizm Color hand held laser scanner to deliver unparalleled non-contact measurement capabilities. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.
- FAROBlu HD LLP laser technology delivers improved scanning results with higher speed and resolution
- FAROBlu SD LLP delivers cost-effective standard resolution scanning solution
- Prizm Color Lase Line Probe scans parts in color, and full, uncompromised measurement resolution
- 8-Axis ScanArm offers comprehensive solution enabling part to be rotated in real-time to simplify measurement and scanning activities

FARO Cobalt Array Imager
Unlimited Multi-Imager Scanning Configurations
The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.
- 5MP model – for most applications
- 9MP model – improves resolution and the ability to capture features on edges and surfaces
- Interchangeable lens with 250mm and 500mm field of view
- Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens

FARO Laser Tracker
Advanced, accurate, and versatile laser trackers
The FARO VantageS and VantageE Laser Trackers are extremely accurate, large-scale portable coordinate measuring machines that enable you to build products, optimize processes, and deliver solutions by measuring quickly, simply and precisely. These Laser Trackers set the standard in workflow productivity management for large-scale metrology applications by offering ease of use, exceptional portability, battery operation, ruggedness, and high accuracy.
- VantageS: 160m (525 ft.) spherical working volume
- VantageE: 70m (230 ft.) spherical working volume
- Accuracy up to 0.015mm (0.0006 in.)* [*Typical angle measurement performance at 2m]
- ActiveSeek™ feature finds and follows target even when you pass behind obstructions

- + FaroArm
-
FaroArm®
The Global Standard for Arm Technology
The FaroArm is an innovative portable coordinate measuring machine that allows manufacturers easy verification of product quality by performing 3D inspections, dimensional analysis, CAD comparison, tool certifications, and more. The Quantum line of FaroArms including the world’s only 8-Axis portable metrology arm solution, extends FARO’s tradition of maximum unsurpassed measurement accuracy, consistency and reliability in every working environment.
- 8-Axis FaroArm enables part to be rotated in real-time for unmatched measuring speed and user friendliness
- FARO kinematic smart probes for quick probe replacement without the need to recalibrate
- Robust high-speed wireless operation
- + ScanArm
-
FARO ScanArm®
The FARO ScanArm combines all of the advantages of the Quantum line of FaroArms – including the world’s only 8-Axis portable metrology arm solution – with the FAROBlu or Prizm Color hand held laser scanner to deliver unparalleled non-contact measurement capabilities. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.
- FAROBlu HD LLP laser technology delivers improved scanning results with higher speed and resolution
- FAROBlu SD LLP delivers cost-effective standard resolution scanning solution
- Prizm Color Lase Line Probe scans parts in color, and full, uncompromised measurement resolution
- 8-Axis ScanArm offers comprehensive solution enabling part to be rotated in real-time to simplify measurement and scanning activities
- + Cobalt
-
FARO Cobalt Array Imager
Unlimited Multi-Imager Scanning Configurations
The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.
- 5MP model – for most applications
- 9MP model – improves resolution and the ability to capture features on edges and surfaces
- Interchangeable lens with 250mm and 500mm field of view
- Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens
- + Laser Tracker
-
FARO Laser Tracker
Advanced, accurate, and versatile laser trackers
The FARO VantageS and VantageE Laser Trackers are extremely accurate, large-scale portable coordinate measuring machines that enable you to build products, optimize processes, and deliver solutions by measuring quickly, simply and precisely. These Laser Trackers set the standard in workflow productivity management for large-scale metrology applications by offering ease of use, exceptional portability, battery operation, ruggedness, and high accuracy.
- VantageS: 160m (525 ft.) spherical working volume
- VantageE: 70m (230 ft.) spherical working volume
- Accuracy up to 0.015mm (0.0006 in.)* [*Typical angle measurement performance at 2m]
- ActiveSeek™ feature finds and follows target even when you pass behind obstructions

FARO CAM2® 2018
Integrated Experience, Intuitive Workflow and Insightful Reporting
FARO CAM2 2018 is the world’s smartest 3D measurement platform and the only metrology software in the market that delivers on the strategic goals to always offer the best integrated FARO hardware experience, intuitive workflow and insightful reporting.
- FARO Inside – optimized to support the FARO portfolio of metrology hardware solutions
- Guided Workflows – simply and easily step through almost any measurement inspection routine
- RPM (Repeat Part Management) Control Center – real-time information for actionable manufacturing insight
- Remote Measurement – run commands, change scanning modes and see results in real-time

FARO CAM2® SmartInspect
The first portable measurement software
FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.
- Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
- On-Screen Dimensioning – Users can interact directly with the graphical view
- Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
- Mobile Device – Move the device during the measurement process and measure from different positions

BuildIT Software & Solutions
Your Product, Your Process, Your Solution
BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.
- Highly configurable and flexible – Streamline your workflows and processes
- Advanced automation capabilities through user friendly interface with no coding required
- Powerful GD&T Analysis capabilities for full model-based workflows
- Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices
- + CAM2 2018
-
FARO CAM2® 2018
Integrated Experience, Intuitive Workflow and Insightful Reporting
FARO CAM2 2018 is the world’s smartest 3D measurement platform and the only metrology software in the market that delivers on the strategic goals to always offer the best integrated FARO hardware experience, intuitive workflow and insightful reporting.
- FARO Inside – optimized to support the FARO portfolio of metrology hardware solutions
- Guided Workflows – simply and easily step through almost any measurement inspection routine
- RPM (Repeat Part Management) Control Center – real-time information for actionable manufacturing insight
- Remote Measurement – run commands, change scanning modes and see results in real-time
- + CAM2 SmartInspect
-
FARO CAM2® SmartInspect
The first portable measurement software
FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.
- Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
- On-Screen Dimensioning – Users can interact directly with the graphical view
- Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
- Mobile Device – Move the device during the measurement process and measure from different positions
- + BuildIT
-
BuildIT Software & Solutions
Your Product, Your Process, Your Solution
BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.
- Highly configurable and flexible – Streamline your workflows and processes
- Advanced automation capabilities through user friendly interface with no coding required
- Powerful GD&T Analysis capabilities for full model-based workflows
- Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices